Imetec BELLISSIMA SENSEPIL LUX - Manual (Page 85)

EN
81
AFTER TREATMENT
14. Press the switch-on/stand-by button (8): all the LEDs that are on, go off
and the stand-by LED (9) lights up.
15. Remember the power level used for the treatment session as this will be
reset when the appliance is next switched on.
16. Disconnect the power supply plug (7a) from the electric socket.
Caring for the skin after the hair removal session.
See “Other precautions for safe use”.
MAINTENANCE
CLEANING AND STORING
It is recommended to clean the appliance and the treatment surface (17) after
each hair removal session:
• Disconnect the power supply plug (7a) from the electric socket before
cleaning it.
• Clean the surface of the handpiece (2) and the treatment surface (17)
gently, with a dry, clean cloth.
• Store the appliance in a cool and dry place, away from heat and water.
ATTENTION:
Never immerse the appliance or any of its parts in water!
REPLACING THE LAMP
• When 100 available light pulses remain, the the lamp replacement
LED (14) starts to flash.