Elmo Rietschle S-VSI 100(01)/300(01)/300(12) - Manual (Page 31)

31 www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH |
Maintenance and repair
7.3 Repair/ Service
a) For on site repair work the motor must be
disconnected from the mains by a qualifi ed
electrician so that it cannot be started up again
accidentally. For repairs use the manufacturer,
its branch offi ces or authorised dealers. Please
contact the manufacturer for the address of the
service centre responsible for you (see Manufac-
turer‘s address).
NOTICE
For each machine that is sent to an Elmo Rietschle
Service centre for inspection, maintenance or repair,
a fully completed, signed declaration of harmless-
ness must be enclosed.
The declaration of harmlessness is part of the
supplier‘s documentation.
b) After a repair or re-commissioning, the actions
listed under „Installation“ and „Commissioning“
must be carried out as for initial commissioning.
Fig. 13 Clearance certifi cate 7.7025.003.17