Introduction, Abbreviations & acronyms, Related documentation – Franklin Fueling Systems T5 Series Fuel Management System Installation Guide User Manual

Page 4

Advertising
background image

4

Introduction

This manual contains installation and site preparation instructions for INCON’s TS-5XXX series of consoles. Overall safety 

issues, troubleshooting information, warranty, service, and return policies, as defined in this manual, must be followed.

Please read this entire manual carefully. Failure to follow the instructions in this manual may result in faulty 

operation, equipment damage, injury or death. This equipment should only be serviced by an INCON-certified installer.

Certified Installer/Service Person:

Only an INCON certified installer or service person is allowed to access both the 

user interface keypad and areas internal to the TS-5 Series console.

Station Owner/Operator:

The station owner or operator of the TS-5 Series console is only allowed to access the user 

interface keypad. Access to areas internal to the console is strictly prohibited.

Abbreviations & Acronyms

10ARLY - 10 Amp Relay Module

2WSMS - 2-Wire Sensor Module (Intrinsically Safe)

3WSMS - 3-Wire Sensor Module (Intrinsically Safe)

420EXP - 4-20 mA EXP module

ACI - AC Input Module

420IB - 4-20mA Analog Input Module (Intrinsically Safe)

AST - Aboveground Storage Tank

ATG - Automatic Tank Gauge

CARB - California Air Resources Board

CM - Controller Module

DIM - Dispenser Interface Module

FMS - Fuel Management Systems

IO - Input / Output module

IS - Intrinsically Safe

ISD - In-Station Diagnostic

LIM - LonWorks Interface Module

PC - Personal Computer

PRB - Probe Module (Intrinsically Safe)

PS - Power Supply Module

RLY - Relay Module

SCM - Secondary Containment Monitoring

TPI - Turbine Pump Interface

TS-5XXX - TS-5 Series Consoles (TS-5 (TS-608), TS-550 (TS-EMS), TS-5000 and TS-EXPC)

TS-EMS - TS-5 Series - Environmental Monitoring System

TS-EXPC - TS-5 Series - Expansion Console

UST - Underground Storage Tank

VRM - Vapor Recovery Monitoring

Related Documentation

The system operation and programming instructions, troubleshooting guide and console maintenance manual are 

provided for your use in separate documents. Detailed installation and testing instructions for each type of leak detection 

sensor are present in the relevant manual, and, likewise, the installation, testing, and programming of various upgrade kits 

and optional accessories are also contained in separate manuals, addenda or in one of this document’s appendixes. 

Advertising