Franklin Fueling Systems TS 550 evo Fuel Management System Operators Guide - Manual (Page 7)

3
Introduction
The purpose of this manual is to guide installers, operators and technicians through the operation of a TS-550 evo
console. The TS-550 evo console incorporates the monitoring and alarm capabilities of preceding automatic tank gauges
with advanced technologies to supply tank and level data more accurately and efficiently. This manual is also designed to
introduce technicians to the optional LCD Graphical User Interface, which is used as an input device to program system
configuration and maintain all applications from the front panel of the console. Overall safety issues, troubleshooting
information, start-up procedures, warranty, service and return policies, as defined in this manual, must be followed.
The TS-550 evo Fuel Management System consists of an open architecture, modular console that can run multiple Fuel
Management Applications simultaneously. It typically contains a color LCD touch screen user interface and a built-in
printer, but it can also be operated by a web-based remote interface. Magnetostrictive Liquid Level Probes inside of
the tanks provide the console with inventory and leak detection information. A variety of optional sensors can be used
to monitor containment spaces. TS-550 evo series consoles combine the power and flexibility of computer-based open
architecture with a high speed modular bus design.
Definitions and Acronyms
AST – Aboveground Storage Tank
Console – The enclosure that houses the Modules.
DHI – Dispenser Hook Isolation
DW/DWT – Double Wall/Double Wall Tank
FAST – Franklin Auto Setup Tool
FMS – Fuel Management Systems
IS – Intrinsically Safe
LCD – Liquid Crystal Display
LON – Echelon Communication Module
LLD – Line Leak Detection
Module – A plug-in card within a T5 series console that is
used to perform various functions for a console.
Modules are used for field wiring the input and/
or output of electrical signals between different
functional equipment pieces.
NWGLDE – The National Work Group Leak Detection
Evaluations
OTB – One Touch Button
QTB – Quick Jump Button
PC – Personal Computer
RS-232 – An EIA standard for serial communication using
either a 9 or 25-pin connector or adapter.
RS-485 – An EIA standard for serial communication.
RTD – Resistance Temperature Detector
RJ-45 – An EIA standard connector for use in
communications with an eight conductor cable.
Usually used in data transmission applications.
RJ-11 – An EIA standard connector for use in
communications using STP wiring. Usually used in
voice and fax applications.
STP – Submersible Turbine Pump
TS-ACI – 12 input, AC Input Module
TS-DIMIB – Dispenser Interface Module
TS-2WSNS – 12 input, 2-Wire Sensor Module (Intrinsically
Safe)
TS-3WSNS – 8 input, 3-Wire Sensor Module (Intrinsically
Safe)
TS-420IB – 4-20mA Analog Input Module (Intrinsically
Safe)
TS-RLY – Relay Module
TSSP-CM – Controller Module
TS-PRB – Probe Module (Intrinsically Safe)
TSSP-PS – Power Supply Module
TPI – Turbine Pump Interface
TS-EMS – Environmental Monitoring System
TS-EXPC – Expansion Console
USB – Universal Serial Bus
UST – Underground Storage Tank
XML – eXtensible Markup Language