Franklin Fueling Systems TS 550 evo Fuel Management System Installation - Manual (Page 14)

14
Non-Standard Power Requirements
The console’s power must be maintained on a power transfer supply for emergency backup generator applications. In
addition, the TS-550 evo series’ line power must be supplied through a UPS (Uninterruptible Power Supply). See Figure 9
for emergency generator applications.
Programming & Testing Discrete Inputs
Program the tank gauge and test the discrete inputs for proper operation after installation. See the TS-550 evo
Programming Guide for reports and programming issues.
Power Supply
Module
RUN
ERR
5V
24V
POWER
L1
N/L2
RELAY OUTPUTS
NC1
C1
NO1
NC2
C2
NO2
LOW VOLTAGE INPUTS
IN1
GND
IN2
GND
PS = Discrete Inputs (Low Voltage Contacts Required)
IN1
GND
IN2
GND
Run Relay (C)
Run Relay (N.O.)
Run Relay (C)
Run Relay (N.O.)
- Generator # 1
- Generator # 2
Figure 9 – Emergency Generator Wiring