Alpha Technologies BPT Series Bypass Transformer - Manual (Page 26)

NOTES:
1.
The UPS will be internally configure
d for either 208V or 240V output.
Check the nameplate rating of the UPS to verify the correct voltage.
2.
Omit this connection if 120V output is not required or available.
3.
Terminal designations are shown for Standard VBPT
Series.
If BPT
-S Series transformer is used, refer to label on transformer for actual terminal
designations.
Figure 6.10
System Bypass Schematic
240V IN - 120V/208V OUT
NO
TE 3
NO
TE 2
NO
TE 2
NO
TE 1
The Alpha BPS Series
Doc# 020-133-B0 Rev. 01 / 07
22