Alpha Technologies XP-EDH4 - Technical Manual - Manual (Page 48)

48 745-419-B0-001 Rev. A (11/2013)
3.9 EDH4 Web Interface
3.9.1 Overview
A Web interface is available on the EDH4 transponder. The default port for HTTP traffic is port 80,
but can be configured to use other ports via the TLGDHttpMgmt MIB. HTTP port configuration is
available for the cable modem interface (via the cable modem IP address) and the CPE interface
(via the Ethernet connection). Setting the value to zero (0) will shut down access to the HTTP
server for the given interface. The specific OIDs and their default values are listed in Table 3-5.
The port must be open to use all of the features described here.
The interface can be accessed by typing the cable modem IP address of the transponder into
your Web browser. The interface includes status data for the cable modem, the HMS transponder,
High Speed Internet Access (HSIA) diagnostics, the RF constellation page and equalizer page,
and the MTA (Media Terminal Adapter) in VoIP systems.
Parameter OID Default
httpCMMgmtPort 1.3.6.1.4.1.2082.5.5.1.1.1.0 80
httpCPEMgmtPort 1.3.6.1.4.1.2082.5.5.1.1.2.0 80
3.0 Configuration and Operation, continued
To view the most current transponder data, refresh the Web page via the browser’s reload or refresh function
(the pages do not automatically update).
NOTE:
Table 3-5, OIDs for Port Management