Switching on the appliance, Selecting the temperature, Operating tips – Siemens K125F User Manual

Page 27: Refrigerator compartment, Coolćfresh compartment

Advertising
background image

27

Switching on
the appliance

Switch on the appliance with the main
switch. Fig. 1/5

The temperature display flashes, Fig. 2/4,
until the appliance has reached the set
temperature.

Interior light in refrigerator compartment
is switched on when the door is open.

Operating tips

S The temperature in the freezer compartĆ

ment depends on the temperature
in the refrigerator compartment.
Warmer refrigerator compartment
temperatures also cause warmer freezer
compartment temperatures.

S While the refrigerating unit is running,

beads of water or hoarfrost form at the
back of the refrigerator compartment.
This is quite normal. It is not necessary
to scrape off the frost or wipe off the
beads of water. The rear panel defrosts
automatically. The condensation flows
into the evaporation area of the
appliance via the condensation
channels and the drainage hole.

Selecting
the temperature

Fig. 2

Refrigerator compartment

(can be selected from +2 °C to +8 °C).

Keep pressing temperature selection
button 3 until the required refrigerator
compartment temperature is set. The
value last selected is stored.

The set temperature is indicated on
display 4.

We recommend a setting of +4 °C.

Perishable food should not be stored
warmer than +4 °C.

CoolĆfresh compartment

The temperature in the coolĆfresh
compartment Fig. 1/C has been set to
almost 0 °C at the factory and should not
be changed if at all possible. If frost forms
on the refrigerated food, the temperature
can be increased. (See Eliminating minor
faults yourself").

en

Advertising
This manual is related to the following products: