Dialight D264-A54-001 Vigilant L864 Based Red Beacon User Manual
Page 3
Document No.
9100-127-1556-99 Rev A
October 19, 2011
_____________________________________________________________________
_____________________________________________________________________________
Dialight Corporation 1501 Route 34 South Farmingdale NJ 07727
Tel: 732.919.3119 Fax:732.751.5778 Web: www.dialight.com
Sheet 3 of 13
Section 1: Overview
The Dialight Flashing Red Beacon is designed for the lighting of structures that pose a
risk to aerial navigation, as specified by the FAA, ICAO and Transport Canada.
The D-264 Flashing Red Beacon as shown in Figure 1, (hereafter referred to as the
Beacon) is pre-wired with a power cable and operates from a nominal 24-48Vdc. The
beacon consists of High Performance LED’s that provide the light output equivalent to an
incandescent fixture while consuming a fraction of the electrical power. This manual
provides guidance and recommendations for the installation and checkout of the beacon
assembly. Please read this document in its entirety before installing the Beacon.
Figure 1
D-264 Flashing Red Beacon
With pre-wired power cable