Installation, Dimensions – MoTeC ADR User Manual
Page 4
ADR Functionality User Manual
Installation
Installation
Mounting to a suitable surface is critical for reliable ADR operation and useful accident data. Install in accordance with
the following notes.
Note:
The ADR must be mounted with each side parallel to one of the 3 primary axes of the vehicle. There are 24 possible
mounting orientations. See the
Orientation
for more detail.
• It is recommended that the ADR is securely mounted on a rigid structural member, close to the driver’s seat.
Avoid mounting to sheet metal bodywork or other vibrating surfaces.
• The mounting location should allow the LEDs to be easily seen by the race crew, officials and emergency
personnel.
Dimensions
Figure 1 – Dimensions and mounting
MoTeC — Published: 11 February 2014
Page 3