MoTeC ADR - Manual (Page 6)

ADR Functionality User Manual Configuration
Password Support
An ADR unit can be password protected to prevent unauthorised access to all ADR features (configuration, upgrading
and event management).
Note:
A password can only be set on an ADR that does not have an existing password. If you want to change a password,
first clear it and then set a new password.
To set a password:
1. Select Device > Set Password menu option.
2. Enter the new password as directed.
To clear a password:
1. Select Device > Clear Password menu option.
Device Configuration
To configure the ADR:
1. Select the Device > Edit Configuration menu option.
Initially the Device Configuration window displays the configuration retrieved from the connected ADR. The
configuration may then be edited or loaded from disk.
Figure 3 – Example Device Configuration window
Note:
Viewing, editing, saving or loading a configuration from disk is all performed via the Device Configuration window.
2. Use the information that follows to perform the required configuration activities.
MoTeC — Published: 11 February 2014 Page 5