Events tab – MoTeC ADR User Manual
Page 8
Advertising
ADR Functionality User Manual
Configuration
Events Tab
Figure 4 – Device Configuration – Example Event Tab
The functions of the parameters on the Events tab are as follows.
Important:
Before selecting triggering methods and thresholds it is important to have a good understanding of event triggering.
Read
on page
before configuring triggering.
Trigger Method
Determines how the three axes of acceleration are used in triggering.
Event trigger level
Threshold for triggering event logging.
Severe event trigger level
Threshold for treating a logged event as a severe event.
Trigger low pass filter
Sets the level of filtering applied to the accelerometer output before used in
event triggering.
MoTeC — Published: 11 February 2014
Page 7
Advertising