Pdms, Other devices – MoTeC C125 User Manual
Page 12
Advertising
MoTeC
Introduction
11
PDMs
Power Distribution Modules are designed to replace conventional relays,
fuses and circuit breakers by providing electronically switched power to the
various electrical systems in the vehicle. This simplifies wiring and switch
requirements, while increasing reliability.
Full diagnostic information, including output currents and error status, can be
transmitted via CAN to the Display Logger.
Several models are available to suit vehicles with different complexity ranging
from 15 to 32 outputs and 12 to 23 inputs.
Other Devices
Many other devices can be connected to the C125 Display Logger.
Advertising