MoTeC C125 - Manual (Page 52)

MoTeC Operation 51
Configuration files can be updated by choosing the option to automatically
update the configuration file while updating the software (firmware). It can
also be done manually by upgrading the configuration file and sending it to
the Display Logger:
• On
the
File
menu, click Open
• In the
Files of type
box select the new version file extension.
The file will be converted to the new version format and saved with the
same file name but with the new version file extension.
Note:
The old file is not changed.
• On the
Online
menu, click Send Configuration to send the
configuration file to the Display Logger
Upgrading the Display Logger
Several options are available as upgrades to customise and grow your
system.
The currently enabled options can be listed and new options can be activated
through a password acquired from MoTeC.
To Upgrade the Display Logger
• On
the
Online
menu, click Enable Dash Options
Password Protection
• On the
Online
menu, click Set Access Passwords
Several Display Logger capabilities can be protected from unauthorised
access by using the password protection.
Note:
Ensure you keep passwords secure. The unit needs to be returned to
MoTeC for unlocking if the passwords are lost.
Other Online Activities
Many other activities are accessible from the Online menu including the
following:
Reference Lap – to send a reference lap to the Display Logger used in
the lap gain/loss system.
View – to view:
o
saved details e.g.
Running Totals
o
Device Halt Counts
Communication – to list the current Connections Settings
Miscellaneous