Castle LB-23 Diagnostics Manual - Manual (Page 15)

How To…
23.60
Motor Check
The machine uses an electrical motor that draws a great deal of amperage. If the motor isn't running
then the following steps should be followed.
SOLUTION STEPS:
1. Switch off the machine, make sure that it is plugged in. The machine should not be powered
through an extension cord of more than six feet.
2. Switch the motor back on.
3. If the motor doesn't activate then try hitting the reset button on the side of the motor housing.
4. Open the rear of the machine and locate the pulley with a good light source.
Revised 2/9/2007