Castle LB-23 Diagnostics Manual - Manual (Page 19)

How To…
23.70
Table Top Adjustment
The table top is adjustable in relation to the guard frame and head. There should be between a 1/8 "
and a ¼ " gap with wood in place. If it is greater then this, the table needs to be adjusted in order for
a proper depth hole to be cut.
SOLUTION STEPS:
1. Locate and LOOSEN the three brackets that lock the table into position. There is one bracket in
front and one on each side underneath the table. The brackets are held in place by 9/16"
hex head nuts.
Revised 2/9/2007