Climax LM6200 Z-AXIS SLIDE ATTACHMENT - Manual

LM6200 Z-AXIS SLIDE ATTACHMENT
Z-axis slide for the LM6200 Linear/Gantry Mill
makes quick work of side milling applications.
2013
LM62Z
10
Many milling applications require the milling head to be positioned
parallel to the ram. An example is when milling an adjacent wall.
The Z-axis slide attachment for the LM6200 Linear/Gantry Mill
bolts between the ram and the milling head and provides 7 inches
(178 mm) of travel in the z-axis. It can be mounted on the ram in 3
different positions – lower, middle, and upper. The milling head can
be attached to the Z-axis slide at 0 deg, 90, 180, or 270°.
A hand wheel or electric power feed can be used to turn the
ballscrew which advances the slide back and forth, allowing precise
positioning or travel during side machining operations, or additional
travel for drilling.
Features
• With the addition of this accessory, milling area is increased
2.5 times to a total machining area of 24.2 x 176 inches
(614.7 x 4470.4 mm) when using a 10 inch (254 mm) face mill
and upper & lower mounting positions.
• 7 inches (177.8 mm) of travel provides ample stroke.
• Drilling, even with longer bits, is now quick & easy with the longer
stroke available with this accessory.
• Z-axis feed can be manual or power fed.
• Travel across the bed without removing the Z-axis Slide in the
middle and upper positions.
• Total center to center spindle distance of 14.2 inches (360.7 mm)
Specifications
Weight: 120 lbs (54.4 kg)
Slide Positions
Lower Position Middle Position Upper Position
(slide is inverted)
Applications
• milling walls
• below the bed surface milling
• drilling and tapping walls
• drilling and tapping below the bed
• drilling and tapping with longer tooling
• weld preparation
• precision wall profiles
• dragline bucket mounting support milling
• ring mill repair
and many more!