Climax Electric axial feed assembly For BB6100, BB7100 and BB8100 - Manual

electric axial feed assembly
electric axial feed assembly
for climax bb6100, bb7100 and bb8100 boring machines
The new Climax Electric Axial Feed
Assembly is designed for use on Climax
BB6100, BB7100 and BB8100 boring
systems. This new feed unit can be easily
adapted to boring machines utilizing 3.5, 5,
6, and 8 inch (88.9, 127, 152.4, and 203.2
mm) diameter bars.
Our electric feed unit not only provides you
with a feed rate that is infinitely adjustable
and reversible from 0.0 to 0.664 inches (0.0
to 17 mm) per minute (critical when
machining large diameter bores) but also
provides you with the capability to quickly
position (or reposition) the tool carrier
directly to the site where your machining
needs to be done. This capability will save
you a considerable amount of time when
repositioning the tool carrier and enable you
to complete your boring operations much
faster. The feed unit has a remote pendant
with a 3.5 foot (107 cm) cord, which allows
the user to control the feed rate, feed
direction and feed stop/start.
The Climax Electric Axial Feed Assembly is
made up of the following components:
• A compact, precision electric motor that
will provide you with infinitely adjustable
(and reversible) boring feed rate from 0.0
to 0.664 inches (0.0 to 17 mm) per
minute.
• A unique mechanical gearbox assembly
allows you to engage and disengage the
electric drive to the boring bar assembly.
With the electric drive disengaged, a
convenient port is revealed that allows a
hand drill to be attached for the purpose
of rapidly advancing the machine’s tool
carrier to the location to be machined. As
a safety factor, this drill access port is
blocked when the electric drive is
engaged to the boring bar assembly.
• A special adaptor plate allows you to
easily connect the electric feed/
mechanical gearbox assembly to Climax
3.5, 5, 6, and 8 inch (88.9, 127, 152.4,
and 203.2 mm) boring bars. Adapters are
also available for competitive boring
systems.
Order inexpensive adapter plates to use on
more than one size boring bar!
Please contact your Climax Sales
Representative for ordering information.
Ordering Information
No. Description
43735 Electric Feed Assembly For
BB6100, 3.5 inch (88.9 mm)
diameter bar
43736 Electric Feed Assembly For
BB7100 or BB8100, 5 or 6
inch (127 or 152.4 mm)
diameter bar
43734 Electric Feed Assembly For
BB8100, 8 inch (203.2 mm)
diameter bar
Electric drive engage/
disengage lever
Mechanical gear box
assembly
High precision
electric drive motor
Safety-activated drill
motor rapid
advance port
Main boring
bar assembly
2011
BEF1
12