Climax CM6200 CIRCULAR MILL - Manual

CM6200 Milling MaChine
Portable, On-Site Machining Solutions
for large Flange Machining
Quality Machine Design Provides Rigid,
Power-Packed Performance
• Extraordinarily rigid design ensures
consistent, high-quality machining
• Large diameter pre-loaded precision
bearing and linear guideways for the
most rigid machining platform.
• Radial and axial travel uses precision ball
screws.
• Milling head with #50 taper spindle easily
handles face mill up to 10 inches (254.0
mm) in diameter.
• Adjustable counterweight provides
precise balance in vertical applications.
• Center machine clearance designed to fit
over 24 inch (609.6 mm) diameter
kingpin.
Flexible and Versatile
• Can be configured for milling or single-
point machining.
• Single point option allows user to cut
chamfers and seal ring grooves, and
machine phonographic finishes.
• Air grinder also available for fine finishes
for sealing surfaces.
• Hydraulic drive or servo drive with
touchscreen pendant and angular control
options available.
• Spindle has 8 inches (203.2 mm) of travel
and is also capable of drilling.
• Multiple mounting options including ID/
OD or face-mounted configurations.
2013
CM62
4
• Swivel plate option allows milling head to
rotate 360°.
• Infinitely adjustable arm position for
limited swing clearance applications.
Rapid Setup & Operation
• Tubular rigid chucking system with
leveling feet allow machine to be leveled
after mounting in the flange for simple &
speedy setup.
• Modular design allows many of the
machine components to be removed to
facilitate easier setup and storage.
• Servo control with touchscreen pendant
allows a wide range of speed
adjustments from rapid advance for setup
to slow machining speeds for precise
control during machining.
• Servo angular control system with
touchscreen pendant provides precision
control of cutter placement and
positioning.
Applications include:
• Heavy construction and mining
• Crane pedestals
• Wind tower fabrication