Climax CM6200 CIRCULAR MILL - Manual (Page 8)

SetuP anD OPeRatiOn
a Fast Seven-Step Process
This model is so fast and easy to set up that an experienced operator can usually mount the machine into the
flange bore, center and level it, and start cutting in less than an hour.
1
Measure the
bore diameter.
This will be used
to determine
the leg length.
2
Select the
appropriate
leg length and
foot.
3
Set machine
into flange
using setup
fingers
4
Extend feet into
flange. Indicate,
level and tighten
leveling feet
and stationary
feet.,
5
Level and
tighten Legs
6
Install tooling
and connect to
power.
7
You are ready
to begin
machining!
Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 8