Climax CM6200 CIRCULAR MILL - Manual (Page 3)

Climax Portable Machining & Welding Systems Web site: climaxportable.com
Worldwide Phone:
1.503.538.2185 N. America Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 E-mail: [email protected]
page 3
SPeCiFiCatiOnS
All dimensions should be considered reference. Contact your Climax Representative for precision dimensions. Specifications are subject to change without notice. There are no systems or components
on this machine that are capable of producing hazardous EMC, UV or other radiation hazards. The machine does not use lasers nor does it create hazardous materials such as gasses or dust.
Tooling Recommendations
Milling
47383 4 inch (101.6 mm) #50 Taper w/ Inserts Max RPM :382 Max depth of cut: 0.060 inches (1.524 mm)
47384 5 inch (127.0 mm) #50 Taper w/ Inserts Max RPM :306 Max depth of cut: 0.060 inches (1.524 mm)
47385 6 inch (152.4 mm) #50 Taper w/ Inserts Max RPM :255 Max depth of cut: 0.050 inches (1.270 mm)
47386 8 inch (203.2 mm) #50 Taper w/ Inserts Max RPM :191 Max depth of cut: 0.040 inches (1.016 mm)
56175 10 inch (254.0 mm) #50 Taper w/ Inserts Max RPM: 153 Max depth of cut: 0.035 inches (0.889 mm)
47229 Carbide Inserts
*Maximum Material removal rate 12 in³/min (196.6 cm³/min). When using an aggressive feed rate, it is recommended that the spindle RPM be increased to reduce the chip
load. Depth of cut may vary depending on rigidity of setup.
Single-point machining
29066*: Bit Tool HSS ¾ x 5.0 RH Finish Single SC
29067*: Bit Tool HSS ¾ x 5.0 LH Finish Single SC
60033*: Holder Insert ¾ SQ Shank Left Hand w/ 10 Inserts Seco Trigon
60034*: Holder Insert ¾ SQ Shank Right Hand w/ 10 Inserts Seco Trigon
61820: 10 Inserts Carbide WNMP 431-MF1 Seco Trigon
*Single point option comes standard with quantity one each of indicated part numbers.
grinding
62633: Wheel Grinding 1-½ Inch Diameter (38.1 mm) CBN 130 Grit 8 mm Bore
62634: Wheel Grinding 2-¼ Inch Diameter (57.2 mm) CBN 130 Grit 8 mm Bore
CLIMAX Portable Machine Tools, Inc. ©
Newberg, OR USA 97132
WWW.CPMT.COM inside U.S. 1-800-333-8311
6481-A1 ID MOUNT MILLING
CM6200 CIRCULAR MILL ID MOUNT
MILLING HEAD
COUNTERWEIGHT
ASSEMBLY
HOSE TOWER
ENCODER GUARD MACHINING ARM
LIFTING EYES
LIFTING EYES
DRAG BRAKE
ADJUSTABLE CHUCK ASSEMBLY AXIAL TRAVEL BRAKE
RADIAL TRAVEL BRAKE
ROTATIONAL DRIVE ASSEMBLY
LEVELING FOOT