Climax FF8000 PORTABLE FLANGE FACER - Manual

F F 8 0 0 0 P O R T A B L E F L A N G E F A C E R
B r i n g i n g t h e s o l u t i o n t o y o u .
Portable Machine Tools, Inc.
®
F E A T U R E S • S E T U P & O P E R A T I O N
C O M P O N E N T S & A C C E S S O R I E S • T E C H N I C A L D A T A
Versatile
• Available in ID or OD mount styles.
• Options include grinding heads, flat
surface mounting, and a mounting
and facing range of up to 10 feet
(3048.0 mm) in diameter.
• Power supply hoses attach to the top
or bottom of the machine with a
rotary union for operation in
horizontal, vertical, or inverted
positions.
Rugged and powerful
• Large volume hydraulic motor, or
two rotational drive air motors.
• Produces accurate machining even
at the maximum turning arm
extension.
• Large diameter, heavy-duty Timken
bearings support the turntable sec-
tion. The turning arms are large
cross-section tubes that provide rigid,
lightweight mounting for the tool
head.
• Smooth rotation is ensured by the
adjustable counterbalance arm and
a set of weights provided with the
machine. Properly adjusted, the
FF8000 rotates at a uniform rate,
even when mounted in vertical
flanges.
• Precise finishes with HSS or
carbide tool bits, even on stainless
steel. Finishes as fine as RMS 16 can
be produced with the optional
grinding head.
• The turning arms mount on the
machine turntable in dovetail ways
for easy positioning.
• The 8.0 inch (203.2 mm) travel radial
feed is pneumatically actuated.
• The tool head/radial feed
mechanism mounts on dovetail ways
at the end of the turning arm, to
re-face to the edge of flanges that
have very little clearance around
them, or cut right up to a shoulder.
Rotating diameter is easily adjustable
in limited clearance applications.
• The four-inch (101.6 mm) travel
vertical feed is manually controlled
during automatic radial cutting
operations, or may be pneumatically
controlled when cutting grooves or
cutting down vertical surfaces.
• The tool holder also rotates up to
45° in either direction for cutting
chamfers or J-weld preps.
Get big flange faces back
in working condition - FAST!
Set up fingers
Jacking bolts
Leg assembly Main body
Vertical slide
Swivel tool
holder
Radial
slide
Feed box
Turning arm
Counterweight
and arm