Climax FF8000 PORTABLE FLANGE FACER - Manual (Page 6)

F F 8 0 0 0 C o m p o n e n t s a n d A c c e s s o r i e s
No. Description
18447 FF8000 pneumatic ID-mount flange facer
Complete flange facing machine. Mounts inside 30 - 96 inch (762.0 -
2438.4 mm) diameter bores. Faces 30 - 96 inch (762.0 - 2438.4 mm)
diameter flanges. Machine comes complete with main body, two air
motors (2.9 hp/2.18 kW total), pneumatic conditioning unit, chuck
arms for 30 - 96 inch (762.0 - 2438.4 mm) diameter bores, short and
long tool arm supports, swivel tool holder, radial and vertical slide
assemblies, short and long counterweight arms with weights, tool kit,
instruction manual, and wooden storage crate.
41995 FF8000 230V hydraulic/pneumatic ID-mount flange facer
Complete flange facing machine. Mounts inside 30 - 96 inch (762.0 -
2438.4 mm) diameter bores. Faces 30 - 96 inch (762.0 - 2438.4 mm)
diameter flanges. Machine comes complete with main body, hydraulic
motor, pneumatic feed box, chuck arms for 30 - 96 inch (762.0 -
2438.4 mm) diameter bores, short and long tool arm supports, swivel
tool holder, radial and vertical slide assemblies, short and long
counterweight arms with weights, tool kit, instruction manual, and
wooden storage crate.
Hydraulic power unit available separately. Contact your Climax
representative for details.
19753 Extended range ID-mount chuck assembly for 96 - 120 inch
(2438.4 to 3048.0 mm) diameters
Includes hub, upper, lower, and formed leg assemblies.
Use with p/n 18447 or 41995 (FF8000 ID-mount flange facers) to
extend its mounting range to bore diameters from 96 - 120 inches
(2438.4 - 3048.0 mm).
Turning extension kit (33807) must be purchased separately to face
diameters up to 120 inches (3048.4 mm).
17801 OD-mount chuck assembly (OD-mount conversion kit)
Includes OD hub, formed legs, leg tubes, leg clamps and instructions.
Convert part number 18447 or 41995 ID-mount machines to OD
mounting for outside diameters of 42.5 - 109.5 inches (1079.5 -
2781.3 mm). Machine faces 30 - 96 inch (762.0 - 2438.4 mm)
diameter flanges.
28451 OD chuck extension kit (OD-mount extension kit) for 96 - 133
inch (2438.4 - 3378.2 mm) diameters (not shown)
Kit includes leg extensions and mounting hardware only. Use with
part numbers 17801 or 19581 to extend OD mounting range to
96 - 133 inches (2438.4 to 3378.2 mm) in diameter.
Turning extension kit (p/n 33807) must be purchased separately to
face diameters up to 120 inches (3048.4 mm).
NOTE: Drawings are for reference only, are not
to scale, and may not represent actual product.
For help contact: Climax Portable Machine Tools, Inc., 2712 E. 2nd St, Newberg, OR 97132 USA Web: www.cpmt.com
Worldwide Phone: 1.503.538.2185 USA/Canada Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 Email: [email protected]
page 6