Climax FF8000 PORTABLE FLANGE FACER - Manual (Page 2)

F F 8 0 0 0 S p e c i f i c a t i o n s
Specifications
US Metric
General Specifications
Tool slide:
Radial travel 10 inches 254.0 mm
Vertical Travel 4 inches 101.6 mm
Swivel -45° to 0 to 45° -45° to 0 to 45°
Tool Feed System:
Automatic feed: pneumatic, reversible 0.003 to 0.20 inches per rev. 0.08 to 0.5 mm per rev.
Manual setup feed (setup only) 0.100 inches per turn of hand wheel 2.5 mm per turn of hand wheel
Tool cutter 3 /
4
inch standard square lathe tool bits 20 mm standard square lathe tool bits
Rotational drive assembly:
Final drive reduction 8:1 helical gear 8:1 helical gear
Machining speed 13 rpm at 2.9 Hp 13 rpm at 2.18 kW
Power source:
Pneumatic (standard) 2 motors, 2.9 Hp total 2 motors, 2.18 kW total
Requires 96 ft3/min at 90 psi min. Requires 2.72 m3/min at 620 kPa min.
Hydraulic (optional) 10 Hp hydraulic power unit. 7.46 kW hydraulic power unit
(Hydraulic Power Unit information available upon request. Please contact your Climax representative.)
Machine shipping dimensions:
Main machine (W x D x H) 60 x 34 x 32 inches 1524 x 864 x 813 mm
ID Chuck arm assembly 65 x 43 x 35 inches 1651 x 1092 x 889 mm
(shipped in two crates) 69 x 37 x 32 inches 1753 x 940 x 813 mm
OD chuck arm assembly 65 x 43 x 35 inches 1651 x 1092 x 889 mm
(shipped in two crates) 69 x 37 x 32 inches 1753 x 940 x 813 mm
Hydraulic power unit - 10 Hp 48 x 27 x 36 inches 1219 x 686 x 914 mm
FF8000 Shipping Weights:
Main machine 2,500 lbs 1,134 kg
ID chuck arm assembly 1,695 lbs 769 kg
OD Chuck arm assembly 2,413 lbs 1,095 kg
Hydraulic power unit - 10 Hp 575 lbs 261 kg
ID Mount Machine Specifications
Standard ID mounting diameter 30 - 96 inches 762.0 - 2438.4 mm
Optional ID mounting chuck
extension kit mounting diameter 96 - 120 inches 2438.4 - 3048.0 mm
Standard facing diameter 30 - 96 inches 762.0 - 2438.4 mm
Optional turning extension kit
facing diameter 96 - 120 inches 2438.4 - 3048.0 mm
OD Mount Machine Specifications
Standard OD mounting diameter 42.5 - 109.5 inches 1079.5 - 2781.3 mm
Optional OD mounting extension
kit mounting diameter 96 - 133 inches 2438.4 - 3378.2 mm
Standard facing diameter 30 - 96 inches 762.0 - 2438.4 mm
Optional turning extension kit
facing diameter 96 - 105 inches 2438.4 - 2667.0 mm
All dimensions should be
considered reference.
Please contact your
Climax representative for
precision dimensions.
Specifications subject to change without notice
For help contact: Climax Portable Machine Tools, Inc., 2712 E. 2nd St, Newberg, OR 97132 USA Web: www.cpmt.com
Worldwide Phone: 1.503.538.2185 USA/Canada Toll-Free: 1.800.333.8311 Fax: 1.503.538.7600 Email: [email protected]
page 2