CEMB USA C211 (C) - Manual (Page 8)

I 0147 - 8 I 0147 - 9
7
8
9
GB GB
ALU-S outside E (aE)
EXTERNAL LIMIT, COUNTERWEIGHT
6.1.2 - W heels with weights inside (alu-s)
Use the automatic distance gauge as follows:
ALU-S inside I (aI)
- Move the gauge to the position indicated in fig. 7; after successful memorization (fig. 6), move the gauge further to
inside the wheel as shown in fig. 8.
- Hold the position for approx. 2 seconds. Successful memorization is indicated by the display as shown in fig. 9.
- Return the gauge to position 0. The measured distance aI appears on the display together with its value (see fig.
11).
- Preset the values for the diameter on the inside and diameter on the outside as described in points c) and d) in
section WHEELS WITH WEIGHTS INSIDE (ALU-S) .
INTERNAL LIMIT, COUNTERWEIGHT