CEMB USA C73 (A) User Manual
Page 6
I 0567 - 6
WD
Cone
Spring
DC
4
GB
3.4 - Guard mounting and adjustment
a) Fasten the components to the base as illustrated in specifi c exploded view.
b) The position of the wheel guard when closed can be adjusted with relative screw accessible at the back. Correct
position is shown in Fig. 1.
c) Check that the microswitch is held down when the guard is closed.
d) Adjust the angular position of microswitch control.
3.5 - Spacer WD
When balancing very wide wheels (9”), there is not enough space to turn the distance gauge. To withdraw the wheel
from the machine side, fi t spacer WD on the adapter body and secure it with the standard issue nuts. When centring
the wheel with the cone on the inside, fi t the other cone as a spacer to obtain spring thrust.
►
►