CEMB USA C73 (A) - Manual (Page 8)

I 0567 - 8 GB
5 - INDICATIONS AND USE OF THE WHEEL BALANCER
The monitor shows several information and suggests various alternative ways of use to the operator.
This is through various “screens”.
5.1 - Initial screen ►
Buttons enabled:
: main functions screen (see MENU ACCESS DIAGRAM )
: selecting static correction
: balancing spin (see RESULT OF MEASUREMENT )
Dimensions gauge :
when extracted, the Dimensions screen is selected (see PRESETTING OF WHEEL
DIMENSIONS ).
If the machine remains on the initial screen for a certain amount of time without being used, the system is
automatically switched to a screen-save. Striking of any key, movement of the wheel of distance + diameter gauge
will cause automatic switching from the screen-save menu to the initial screen.
5.1.1 - Screen-save screen
Name of the wheel balancer’s owner. Can be preset via the monitor.
►