ALLIED Vision Technologies Guppy PRO F-503 - Manual (Page 100)

Description of the data path
Guppy PRO Technical Manual V4.0.0
98
The increment length is ~0.0353 dB/step.
One-push white balance
The camera automatically generates frames, based on the current settings of
all registers (GAIN, OFFSET, SHUTTER, etc.).
For white balance, in total 9 frames are processed. For the white balance
algorithm the whole image or a subset of it is used. The R-G-B component
values of the samples are added and are used as actual values for the one-
push white balance.
Note

While lowering both U/B and V/R registers from 284 towards
0, the lower one of the two effectively controls the green
gain.
Figure 39: U/V slider range
Type Range Range in dB
Guppy PRO

color cameras
0 ... 568
 10 dB
Table 41: U/V slider range of the various Guppy PRO types
Note

Configuration
To configure this feature in control and status register (CSR):
See
Table 40: White balance register on page 97.