ALLIED Vision Technologies Guppy PRO F-503 - Manual (Page 206)

Configuration of the camera
Guppy PRO Technical Manual V4.0.0
204
Example
This requires, for example, that to enable ISO_Enabled mode (see Chapter
ISO_Enable / free-run on page 159), (bit 0 in register 614h), the value
80000000 h must be written in the corresponding register.
Far left
Bit
0
Bit
1
Bit
2
...
Bit
30
Bit
31
MSB LSB
Table 101: 32-bit register
Figure 89: Enabling ISO_Enable
Offset of Register: (0x0F00614)
ISO_Enable
Write 80000000 and click Write
Content of register: 80000000
= 1000 0000 0000 0000 0000 0000 0000 0000