ALLIED Vision Technologies Guppy PRO F-503 - Manual (Page 133)

Description of the data path
Guppy PRO Technical Manual V4.0.0
131
(see Figure 63: Mapping of possible Format_7 modes to F7M1...F7M7 (F-
503 only) For default mappings per factory see page 180 on page 132 )
• Mappings can be stored via register (see Chapter Format_7 mode
mapping (only Guppy PRO F-503) on page 262) and are uploaded
automatically into the camera on camera reset.
• The default settings (per factory) in the Format_7 modes are listed in
the following table
Format_7 Guppy PRO monochrome Guppy PRO color
Mode_0 full resolution, no binning,

no sub-sampling
full resolution, no sub-sampling, no binning
Mode_1 2 x horizontal binning 2 x horizontal binning
Mode_2 2 x vertical binning 2 x vertical binning
Mode_3 2 x full binning 2 x full binning
Mode_4 2 out of 4 horizontal sub-sampling 2 out of 4 horizontal sub-sampling
Mode_5 2 out of 4 vertical sub-sampling 2 out of 4 vertical sub-sampling
Mode_6 2 out of 4 full sub-sampling 2 out of 4 full sub-sampling
Table 50: Default Format_7 binning and sub-sampling modes (per factory)
Note

• A combination of binning and sub-sampling modes is
not possible.

Use either pure binning or pure sub-sampling modes.
• The Format_ID numbers 0...27 in the binning /

sub-sampling list on page 132 do not correspond to any
of the Format_7 modes.