ALLIED Vision Technologies Manta G-917 - Manual (Page 108)

Manta Technical Manual V7.0.1
108
Camera interfaces
Manta output block diagram
Manta delay
The cycle delay for all Manta cameras is:
tpdLH < 3.5 μs and tpdHL < 30 μs
Figure 68: Manta: output block diagram
Caution

Manta
• Max. 10 mA per output
• OutVCC
 30 V may damage the camera.
OutVCC Resistor value*
5 V 1.0 k

at
 5 mA minimum required
current draw
12 V 2.4 k

24 V 4.7 k

* Resistor required if GPOut1/2 connected to a device with < 5 mA draw,
i.e. high impedance
Figure 69: Manta: OutVCC and external resistor
Note

For this reason, we recommend to trigger on the rising edge.
This guarantees a reaction time that is as fast as possible.
External Internal
OutVCC
GPOut1
GPOut2
R
R