ALLIED Vision Technologies Manta G-917 - Manual (Page 87)

Manta Technical Manual V7.0.1
87
Camera dimensions (type A)
Cross section: CS-Mount (type A)
Adjustment of the CS-Mount
The dimensional adjustment cannot be done by the customer. All modifications
have to be done by the AVT factory.
www

Choose protection glass or filter according to the
AVT Modular Camera Concept.
http://www.alliedvisiontec.com/emea/support/downloads/
product-literature/manta.html
Note

Maximum protrusion means the distance from lens flange to
the glass filter in the camera.
Figure 49: Manta CS-Mount dimensions (type A)
Note

If you need any modifications, please contact Customer
Care: For phone numbers and e-mail:
See
Contacting Allied Vision Technologies on page 6.
Adjustment spacer
Filter / protection glass
Maximum
protrusion 5.1
Ø
16
CS-Mount