ALLIED Vision Technologies Prosilica GC2450 - Manual (Page 56)

Prosilica GC Technical Manual V2.0.8
56
Camera trigger
Camera I/O non-isolated user circuit example
The non-isolated trigger circuit is connected to a Texas Instruments
SN74LVC2G241 buffer/driver inside the camera. See the Texas Instruments
SN74LVC2G241 for more detailed information.
Figure 38: Prosilica GC non-isolated user circuit
Caution

Input: Incoming trigger must be able to source 10 μA,
at 3.3 V. Input trigger voltage greater than 5.5 V will
damage the camera.
Output: The maximum sync output current is 24 mA,
at 3.3 V.
CAMERA GND
1
2
3
4
5
6
7
8
9
10
12
HIROSE HR10A-10P-12S
1
2
3
4
5
6
7
8
9
10
11
12
CABLE SIDE
11
12 V POWER
IN 2
OUT 2
CAMERA GND
CAMERA POWER
IN 2 (3.3 V DRIVER)
OUT 2 (3.3 V RECEIVER)