ALLIED Vision Technologies Prosilica GC2450 - Manual (Page 6)

Prosilica GC Technical Manual V2.0.8
6
Introduction
Introduction
This AVT Prosilica GC Technical Manual describes in depth the technical speci-
fications of the Prosilica GC camera family including dimensions, feature over-
view, I/O definition, trigger timing waveforms, and frame rate performance.
For information on software installation read the AVT GigE Installation Man-
ual. For detailed information on camera features and controls specific to the
Prosilica GC refer to the AVT GigE Camera and Driver Features and AVT GigE
Camera and Driver Attributes documents.
Document history
www

AVT Prosilica GC literature:
http://www.alliedvisiontec.com/us/support/downloads/
product-literature/prosilica-gc.html
Version Date Remarks
V2.0.0 2011-Jul-22 New Manual - RELEASE status
V2.0.1 2011-Oct-07 Added note to Figure 34
V.2.0.2 2012-Sep-21 • Renamed Camera IO signals
• Reworked cleaning optics section
V.2.0.3 2013-Jan-14 • Updated the exposure control values
• Updated the Frame rate vs. Height graphs
• Removed the internal I/O circuit diagram
V2.0.4 2013-Mar-26 • Added Status LEDs section
• Added Appendix
• Updated the RoHS directive
• Updated the pixel format naming according to the GenICam naming con-
vention
• Added caution regarding the drive voltage for the video iris lens on page 54
• Added frame rate formulas in the Resolution and ROI frame rates chapter
V2.0.5 2013-May-07 • Updated the exposure control values in the Specifications chapter
• Added VIMBA SDK link in the Additional references section
• Updated AVT recommended cabling to Category 6 or higher in the Gigabit
Ethernet port section
to be continued on next page
Table 1: Document history