Auto Page C3-RS1100 - Manual (Page 19)

C3 RS1100REV. A 19
4. Press the transmitter button corresponding to the feature you want to
program.
Press
Transmitter
Button
One Chirp /
LED one pulse
Factory Default
Setting
Two Chirps /
LED two pulses
Three Chirps /
LED three pulses
Four Chirps /
LED four pulses
1
Active arming
Passive arming
without passive
door locking Passive arming
with passive door
locking.
2 Automatic Rearm
off
Automatic
Rearm on
3 Instant Door Ajar
error chirp
45 seconds
delay Door Ajar
error chirp.
4 All Confirmation
chirps on
Siren
Confirmation
chirp on only Horn
Confirmation
chirp on only
All Confirmation
chirps off
5 +
Panic with
Ignition off
Panic with
Ignition on & off
Panic with
Ignition on & off.
Panic with No
time limit.
Without Panic
function.
6 + Without Car-jack
mode
Active Car-jack
mode
Passive Car-jack
mode
7 +
With Dome light
turns on & off
after ignition off
(45 second door
by-pass)
With Dome
light turns on
after ignition off
(45 second door
by-pass)
Without this
feature
8 +
Lock/Arm &
Unlock/Disarm
Confirmation
Chirp
Lock/Arm
Confirmation
Only
Exit: Turn Ignition to 'ON' position, or leave it for 15 seconds. 3 long chirps & 3 parking
light flashes will confirm exit.
45 seconds Delay Door Ajar Error Chirp:
This feature controls the error chirp that is generated if the system is armed with the door trigger
active. This is useful in a vehicle that has a long dome light delay af ter the door has been closed.
If the system is armed before the dome light has turned off, the security system will generate the
door trigger error chirp. Use this feature to disable the door open error chirp.
With Dome light turns on after ignition off:
Some vehicles turn on the dome light when ignition key is turned off. After remote start, with
alarm on, a false alarm may occur when the run time elapses and the dome light comes on. To
prevent this from happing, program Alarm Feature A-7
to “With Dome light turns on after ignition
off (45 second door by-pass)”.
ALARM FEATURE “B” PROGRAMMING: