Auto Page C3-RS1100 User Manual

Page 25

Advertising
background image

C3 RS1100REV. A

25

6

+

Temperature-
Control Starting

OFF

Temperature-Co
ntrol Starting

“ON”
0 ºF / -18 ºC

Temperature-Cont
rol Starting “ON”

15 ºF / -9 ºC

7

+

Press

button = Activate

Remote Start.

Press

-

button =

Activate Remote

Start.

Press

+

button =

Activate Remote

Start.

8

+

H6/4 White/Blue
wire=
1 pulse activate

H6/4 White/Blue

wire =

2 pulse activate

H6/4 White/Blue

wire =

3 pulse activate

Exit: Turn Ignition to 'ON' position, or leave it for 15 seconds. 3 long chirps & 3 parking
light flashes will confirm exit.

SAFE START (Child safety mode)

Factory defaults setting to press the

button once to start the vehicle.

Programming this feature to eliminate an accidental remote start,

1. The user presses the transmitter

buttons “twice” within 3 seconds to start the

vehicle. or

2. The user presses the transmitter

and

buttons at the “same time” to start

the vehicle.

START FEATURE “E” PROGRAMMING:

1. Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2. Push the Valet switch 11 times (holding in on the 11

th

push) until five chirps with

one long chirp is heard then release the valet switch. You are now in the Start
feature “E” programming mode.

3.

Press and release the transmitter button corresponding to the feature you want to
program.

Press

Transmitter

Button

One Chirp /

LED one pulse

Factory Default

Setting

Two Chirps /

LED two pulse

Three Chirps /

LED three pulse

Four Chirps /

LED four pulse

1

Exit the programming mode. (3 long chirp & 3 parking light flashes to confirm

this exit.)

2

+

Tachometer

Check type (3A)

Voltage check

type (go to 3B)

Timer checking

type (go to 3B)

Data Bus

Interface

Mode**

3

A> RPM learning – see RPM Learning page 26.

B> Start Crank

Time:

0.6-second

0.8-second (2 chirps), 1.0-second (3 chirps), 1.2-second (4
chirps), 1.4-second (5 chirps), 1.6-second (6 chirps),

1.8-second (7 chirps), 2.0-second (8 chirps), 3.0-second (9
chirps), 4.0-second (10 chirps),

4

Low check level

Hi check level

5

Start or Stop the system for TESTING & ADJUSTMENT

Advertising