eLine Technology ECO3 User Manual - Manual (Page 22)

22
User Manual
POWER
While supplying power to DVR and the system running,this lamp will be
lighted to green.When the system is in standby mode,this lamp will be
lighted to red.When power supply cut off,the lamp will be off
HDD
Hard disk indication,it is blink when the hard disk is working,or it will be
off
IR
Infrared signal receiver lamp,when operate the DVR by remote
control,it will blink
ALARM Alarm indication lamp,it is light when there is alarm,or it will be off
REC Record indication lamp,it is blink when DVR is recording,or it will be off
NET
Network connection indication lamp,it is light when the PC client
connect to the DVR
Slow play 1.Cursor move;2.Slow play;3.It means up while in PTZ control
Frame on 1.Cursor move;2.Frame on;3.It means down while in PTZ control
Rewind 1.Cursor move;2.Rewind;3.It means left while in PTZ control
Fast forward 1.Cursor move;2.Fast forward;3.It means right while in PTZ control
OK/Play/Pause ← 1.Confirm select;2.Play/Pause
3(Indication
lamp area)
4(Direction
keys)