User manual – eLine Technology ECO3 User Manual User Manual
Page 62

62
User Manual
6. Waits for 3 seconds, the DVR will display “Transmitting data finished. Updating software ...”. It probably takes 2-3 minutes to update the software.
7. When a window that contains the information of upgrading successfully pops up, it means that the update finished. Then, the machine will
automatically restart.
8. After the system restart, the admin password is the former version’s.
4.11.2 USB Upgrade
Operation steps:
1. Copy the upgrade.bin to the U disk.
2. Insert the USB flash to the USB port on the back panel, after the USB device recognized, enter th e "information" interface, click "USB
upgrade", and confirm the hints to start upgrade.
3. The host says “The system is updating...”.
4. When the upgrade have been finished, the host will pops out “Update success, it’s rebooting, plea se wait...”,that indicates the upgrade is
successful, then the host will restart automatically.