eLine Technology EYS-VMS eyStream User Manual Part2 - Manual (Page 13)

113
3. In the Basic properties group (2), identify the archive:
a. in the Archive name field, enter the desired archive name.
b. From the Color list, select a color to label the archive.
4. Place the archive partitions on one or several volumes of the server 3):
a. From the Partition type list, select the desired type of archive partition on the disk: a
file or the entire volume.
Note
The system disk cannot be completely allocated for an archive
b. If you select a File partition, enter the full path to the .afs file which should be used
for creating an archive partition on the disk in the Archive file field.
Note
If the indicated file does not exist, it will be automatically created
when changes are saved
Note
If an archive was created from an existing file, it will be possible to
extract archived recordings from the file only if the following
conditions are met:
i.
ii.
The name of the computer on which the recording was written
to the existing archive file is the same as the name of the
current computer.
The IDs of the video cameras from which the recordings were
written to the existing archive file are the same as the IDs of
the current video cameras.
c. If you select a File partition, enter the amount of disk space in gigabytes which should
be used for the archive partition in the Size field.
eLineTechnology.com 303.938.1133