eLine Technology EYS-VMS eyStream User Manual Part2 - Manual (Page 33)

133
To add a video camera by using the map context menu:
1. Right-click to open the map context menu and select Add video camera.
2. Select the necessary video camera in the displayed list by using one of the following
methods:
a. If the necessary video camera is included in a group, you must first select the group
(the group may also contain subgroups), then select the video camera.
b. If the necessary video camera is not included in one of the groups, you must select
the list of all video cameras that follows the list of groups.
3. Repeat steps 2 and 3 of the instructions for adding a video camera to the map by using the
viewing tile context menu.
The video camera has now been added.
There is another way of adding a video camera to the map:
1. In the video camera panel, left-click a video camera's icon. Holding down the mouse, drag it
on to the map.
2. Repeat steps 2 through 4 of the instructions for adding a video camera to the map by using
the viewing tile context menu.
The video camera has now been added.
Adding sensors and relays
To add sensors and relays to the map:
Note
Only Sensor and Relay objects that have been activated can be added to the
map.
1. Right-click the icon of the video camera on the map. A context menu appears.
2. To add a sensor, select Add sensor (1). To add a relay, select Add relay (2).
eLineTechnology.com 303.938.1133