eLine Technology EYS-VMS eyStream User Manual Part2 User Manual
Page 88
188
Note
A video camera is displayed on the video camera panel only once. If you selected
a group containing subgroups that all include a specific video camera, that video
camera will be displayed on the video camera panel only once.
Note
If you selected a group containing subgroups, the video camera panel will display
the video cameras included in that group as well as the cameras in all subgroups
of that group.
To display the image from a selected camera in the viewing tile, perform one of the following
sequences of actions:
1. Shift the given viewing tile into active mode (with a mouse click) and select the video
camera from the list on the video camera panel.
2. Select the video camera from the list on the video camera panel by clicking it with the
mouse and, while holding down the mouse button, move the cursor to the viewing tile and
then release the mouse button.
The image from the selected video camera will then be displayed on the viewing tile.
Scaling the Viewing Tile
The scale of the viewing tile can be adjusted. You can do this by using the buttons in the upper
right-hand part of the active viewing tile:
1.
— enlarges the viewing tile;
Note
This button becomes inaccessible when the tile is maximized
2.
— reduces the size of the viewing tile.
Note
This button becomes inaccessible when the tile is minimized
eLineTechnology.com
303.938.1133