eLine Technology EYS-VMS eyStream User Manual Part2 - Manual (Page 31)

131
then release the mouse button.
Note
Actions c and d are not available if no maps have been created in the
system
2. Enter the map's name (1) and choose the picture that will be used as a blueprint of the
guarded facility (2).
Note
The maximum image size is 4 million pixels (the number of pixels at
2000x2000 resolution). If a larger image is selected, no map is created
Note
It is not necessary to use an image for the map. If you do not, a standard
blueprint of the guarded site will be used.
3. Click Apply (3).
You have created a new map.
Adding system objects to the map
On maps you can add three types of system objects (video camera, relay, and sensor) as well as
objects for switching to another map.
Adding video cameras
You can add cameras to the map in one of two ways:
1. By using the viewing tile context menu.
2. By using the map context menu.
3. By dragging a video camera icon from the video camera panel to the map.
To add a video camera to the map by using the viewing tile context menu:
1. In the viewing tile context menu, select Add to map.
eLineTechnology.com 303.938.1133