eLine Technology EYS-VMS eyStream User Manual Part2 - Manual (Page 37)

137
In order for Forensic Search in archive to be possible with a video camera, the following conditions
must be met:
1. There are video stream recordings from the desired video camera in the archive.
2. There are metadata recordings from this video stream in the object trajectory database.
3. The user has the appropriate permissions.
This section contains information on how to configure the EyStream software package to satisfy
these conditions.
Possible ways to configure recording to the video stream
archive
Any of the following recording modesallow using Forensic Search for a camera's archive
footage(see the section
Configuring Recording of the Video Stream from Video Cameras to the
Archive ):
1. Constants recording.
2. Initiated recording.
3. Scheduled recording.
Enabling recording of video stream metadata
To enable recording of video stream metadata, you must perform the following steps:
1. Switch to the Detection Tools tab under Settings.
2. Enable situation analysis (see the section
Enabling Situation Analysis ).
3. Select Yes in the object trajectory recording list.
4. Click the Apply button.
Recording of video stream metadata will then be enabled. The video stream metadata will be
recorded to the object trajectory database when the video stream is recorded to the archive.
Note
Information on configuring storage of metadata is provided in the section titled C
onfiguring storage of the archive, system log, and metadata
Configuring user permissions for Forensic Search in archive
eLineTechnology.com 303.938.1133