eLine Technology EYS-VMS eyStream User Manual Part2 - Manual (Page 54)

154
2. In the Path for snapshot export (3) and Path for video export fields (4), enter the full
path to the folders where exported files are to be saved. To do this, click the button .
Attention!
If you modify the paths to exported file folders on one computer, those
paths will also be changed on all computers in the EyStream Domain and on
all Clients
3. If you need to automatically export snapshots while "freezing" video in real time, select the
corresponding check box (5).
4. Click the Apply button.
Changing the export settings is now complete.
Exported video recordings will be stored in .mkv format; video frames will be stored in JPG
format.
Configuring Alarm Management Mode
You can set the following parameters for alarm handling:
1. The maximum allowed time for ignoring alarms is the length of time a new alarm can
remain unaccepted for handling by an operator before it is assigned Unclassified status
and is deleted from the Alarms tab.
Note
To begin processing an alarm, you must switch to Alarm Management
mode
Note
The time allowed for evaluating an alarm after accepting it for handling is
not limited
Note
If the operator is in Alarm Management mode and activates a tile from
another video camera, Alarm Management mode will close
eLineTechnology.com 303.938.1133