eLine Technology ETV_v7 - Manual (Page 102)

ETV System Server Software - User’s Guide Page 102
Sub Stream
Settings…
On PROSERIES Cards, you can enable sub
stream video feed for analog video channels.
Resolution, Quality, FPS and Bitrate can be set.
The Sub Stream will be available to VIGIL
Clients connected to the DVR Server.
Keyboard
Settings…
Allows you to add, edit, or remove a special camera control keyboard, such as the Pelco KBD300A.
Note: The Pelco KBD300A F1 and F2 buttons can be used to latch on and off VIGIL Server Relays
#1 and #2.
10.9 Proxy Tab
The Proxy tab allows you to configure a connection to a proxy server if it is required on your network to reach
IP cameras.
Enable HTTP Proxy Enables HTTP Proxy.
Proxy Server Enter the IP address or DNS name of the proxy server.
Proxy Port Enter the port for the proxy server; the default value is 8080.