eLine Technology ETV_v7 - Manual (Page 112)

ETV System Server Software - User’s Guide Page 112
Client Connections Tab
The Client Notifications tab allows you to configure the settings to send Digital Input Alarm notifications to
VIGIL Client(s). The Client Connections list is a global list shared between Video Motion Alarms, Digital Input
Alarms, and Video Analytics Alarms. To enable/disable a client in the list, click the checkbox.
Notification Settings Tab
Configure Notification and Relay settings for the selected Digital Input.
Email Notification
When enabled, an email is sent when an alarm is triggered. Click Email Settings... to configure the email
recipients and contents. Enter the appropriate details for the email that will be sent. To add, edit, or remove
email recipients, use the Recipients section and the appropriate buttons. Enabling Attach Still Shot will add a
still image of the selected cameras to the outgoing email. This image is from the beginning of the triggered
alarm event.
Note: For email options to function properly, a valid SMTP server must be set up correctly in the DVR Settings
tab.
Output Relay
Select the Output Relay to trigger when the Digital Input Alarm is triggered. The Output Relay can be
set to Latched or Momentary.
Notification Settings
Popup Alarm
Screen
When a Digital Input alarm is triggered, opens an Alarm window on the DVR.
Monitor Output
To display the Camera feed associated with the Digital Input on a Monitor during an alarm,
choose the Monitor Number or All Monitors from the Drop-Down.
This option, which will only work in conjunction with enabling the Popup Alarm Window, will
Suppress Email
Notification
prevent a flood of email alerts being sent out. It will only send out one email alert until the
alerts have been acknowledged on the Popup Alarm window. If alerts have been set to auto
acknowledge, it will send out an email after each period of auto acknowledgement has
passed.
Audio Notification
Enables audio notification which plays a system beep or wave file when an alarm is
triggered. When Wave File is selected, click … to browse for the .wav file that will be
played.