Brooks Instrument SLA5810/20 - Manual (Page 22)

3-2
Section 3 Operation
Models SLA5810 and SLA5820
Installation and Operation Manual
X-PR-SLA5800-PC-eng
Part Number: 541B091AAG
July, 2010
The Digital PC is capable of storing up to 10 different sets of PID controller
settings and valve performance data. The Digital PC can contain settings for
different gases or for the same gas at multiple conditions (pressures, full-
scale flow rates). Section 3-4 Analog I/O Mode of Operation describes more
information about the data contained in the calibration table and how to
access the data.
The DeviceNet Instruction Manual describes further details on specific
communication features.
Calibrations will appear in the calibration table in the same order as they
appeared on the customer order, unless otherwise specified. The first listed
gas will appear as calibration #1 the second as calibration #2 and so on. Note
that unless specified otherwise on the customer order any unit containing a
single calibration will have that calibration stored in calibration position 1.
Figure 3-1. Model SLA5810/20 Pressure Controllerer.
Figure 3-2. Model SLA5810/20 Silicon Chip Configuration.