Alliance Laundry Systems PHM1397C - Manual (Page 17)

© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
Specifications and Dimensions
15 F8112101
Machine Dimensions
Dimensional Clearances
Allow 24 inches (600 mm) at the rear of the machine
and 18 inches (450 mm) is recommended at the sides
for maintenance, inspection and adjustment.
In multiple installations, allow 18 inches (450 mm)
between machines. Machine dimensions are indicated
in Figure 2 through Figure 8. For minimum
clearances, refer to Figure 10.
NOTE: The dimensions shown here are for
planning purposes only. They are approximate and
subject to normal manufacturing tolerances. If
exact dimensions are required for construction
purposes, contact the distributor or the
manufacturer. We reserve the right to make
changes at any time without notice.