Alliance Laundry Systems PHM1397C - Manual (Page 45)

© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
Specifications and Dimensions
43 F8112101
Steam Requirements
(Steam Heat Option Only) For washer-extractors equipped with optional steam
heat, install piping in accordance with approved
commercial steam practices. Steam requirements are
shown in Table 15.
NOTE: Failure to install supplied steam filter may
void warranty.
Never touch internal or external steam
pipes, connections, or components. These
surfaces can be extremely hot and will
cause severe burns. The steam must be
turned off and the pipe, connections, and
components allowed to cool before the
pipe can be touched.
SW014
WARNING
Steam Supply Information
40 60 80 100 125 140/175
Steam inlet connection, in. (mm)
1/2 (DN13) 1/2 (DN13) 1/2 (DN13) 1/2 (DN13) 3/4 (DN19) 3/4 (DN19)
Number of steam inlets 1 1 1 1 1 1
Recommended pressure, psi (bar)
30 – 80
(2 – 5.5)
30 – 80
(2 – 5.5)
30 – 80
(2 – 5.5)
30 – 80
(2 – 5.5)
30 – 80
(2 – 5.5)
30 – 80
(2 – 5.5)
Maximum pressure, psi (bar) 80 (5.5) 80 (5.5) 80 (5.5) 80 (5.5) 80 (5.5) 80 (5.5)
Table 15