Burkert Type 8625 - Manual (Page 10)

8 - 8625-2 Standard
english
5 COMMISSIONING
NOTE Interference with the device is only allowed by specialist
personnel using suitable tools!
Before interfering with the temperature controller, always
switch off the voltage!
On screwing the temperature controller onto the proportional
valve, make sure the seal is correctly seated!
Î Unscrew the 4 screws on the front panel of the temperature controller and
remove the cover carefully.
Î Place the housing of the temperature controller with the seal onto the valve.
Î Screw the temperature controller tightly to the valve.
5.1 Connecting to the proportional valve
Î Place the conver on the temperature controller and screw it tight with the 4
screws
Fig.: Connecting the temperature controller to the proportional valve
ATTENTION!
Make sure the cover is placed on the right way round
(pinned strips must engage in the sockets).
ATTENTION!